GOLD control began to produce solid state relay and SCR power controller since 1992.
Language
·Ratings from 20A to 80A @ 40-530 VAC
·1000 Volts transient overvoltage
·LED input status indicator
··Strengthened output design specifically for temperature control.
·CE approved, RoHS/EMC compliant.
·All-in-one SSR with build-in Heatsink
·Designed in according with the requirements of IEC 62314
·Zero-crossing (resistive loads) output
+86-13795385467
PRODUCT SELECTION
Control Voltage | 20A | 25A | 40A | 50A | 60A | 80A |
90-280 VAC | SAH4820A | SAH4825A | SAH4840A | SAH4850A | SAH4860A | SAH4880A |
4-32 VDC | SAH4820D | SAH4825D | SAH4840D | SAH4850D | SAH4860D | SAH4880D |
OUTPUT SPECIFICATIONS
Description | 20A | 25A | 40A | 50A | 60A | 80A |
Operating Voltage (47-63Hz) [Vrms] | 40-530 | 40-530 | 40-530 | 40-530 | 40-530 | 40-530 |
Transient Overvoltage [Vpk] | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
Maximum Off-State Leakage Current @ Rated Voltage [mArms] | 5 | 5 | 5 | 5 | 5 | 5 |
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] | 300 | 300 | 300 | 500 | 500 | 500 |
Maximum Load Current(2) [Arms] | 20 | 25 | 40 | 50 | 60 | 80 |
Minimum Load Current [Arms] | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 |
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] | 248/260 | 392/410 | 477/500 | 573/600 | 764/800 | 859/900 |
Maximum On-State Voltage Drop @ Rated Current [Vrms] | 1.15 | 1.15 | 1.15 | 1.2 | 1.2 | 1.2 |
Thermal Resistance Junction to Case (Rjc) [°C/W] | 1.62 | 1.12 | 0.71 | 0.59 | 0.57 | 0.49 |
Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec] | 234/222 | 285/259 | 1770/1629 | 2124/1954 | 2442/2247 | 3230/2971 |
Minimum Power Factor (with Maximum Load) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Weight (typical) [Gram] | 175 | 433 | 433 | 680 | 680 | 980 |
INPUT SPECIFICATIONS (1) |
|
|
Description | SAH48xxA | SAH48xxD |
Control Voltage Range | 90-280 Vrms | 4-32 VDC |
Maximum Reverse Voltage | - | -32 |
Minimum Turn-On Voltage | 90 Vrms | 3.0 VDC |
Minimum Turn-Off Voltage | 10 Vrms | 1.0 VDC |
Minimum Input Current [mA] | 5 | 7 |
Maximum Input Current [mA] | 15 | 12 |
Nominal Input Impedance | Current Regulated | Current Regulated |
Maximum Turn-On Time(3) [msec] | 20 | 1/2 cycle |
Maximum Turn-Off Time [msec] | 20 | 1/2 cycle |
GENERAL SPECIFICATIONS
| Description | Parameters |
Dielectric Strength, Input/Output/Base (50/60Hz) | 4000 Vrms |
Minimum Insulation Resistance (@ 500 V DC) | 109 Ohm |
Maximum Capacitance, Input/Output | 8 pF |
Ambient Operating Temperature Range | -40 to 80°C |
Ambient Storage Temperature Range | -40 to 125 °C |
Housing Material | UL E211125: 94 V-0 |
Terminal Material | Gilded |
Humidity | 85% non-condensing |
LED Input Status Indicator | Red |
RECOMMENDED MODEL & HEATSINK
Choosing compatible current is critical in selecting a right model of solid state relay. Our engineers recommend SSR models according to actual applications and internal components of relay. For example, when solid state relay is used for electric heating, because of the cold resistance effect (the resistance value is 60% of heating wire value when it is in cold state), the SSR’s current should be 1.67 times bigger than actual working current in order to prevent the over-current of solid state relay.
Actual Load Current | 0.15A-12A |
| 0.15A-18A | 0.15A-22A | 0.15A-27A | 0.15A-31A | 0.15A-40A |
Recommended Model(4) | SAH4820D |
| SAH4825D | SAH4840D | SAH4850D | SAH4860D | SAH4880D |
Application to Single-Phase Motors
| Actual Load Current | 0.15A-2A | 0.15A-5A | 0.15A-7A | 0.15A-8A | 0.15A-10A | 0.15A-12A |
Recommended Model(4) | SAH4820D-R | SAH4825D-R | SAH4840D-R | SAH4850D-R | SAH4860D-R | SAH4880D-R |
Application to Transformer Loads
| Actual Load Current | 0.15A-4A | 0.15A-10A | 0.15A-12A | 0.15A-15A | 0.15A-17A | 0.15A-22A |
Recommended Model(4) | SAH4820D-R | SAH4825D-R | SAH4840D-R | SAH4850D-R | SAH4860D-R | SAH4880D-R |
Application to Solenoid Valves
Actual Load Current | 0.15A-1.4A | 0.15A-3.7A | 0.15A-4.5A | 0.15A-5.4A | 0.15A-6.3A | 0.15A-8.18A |
Recommended Model(4) | SAH4820D-R | SAH4825D-R | SAH4840D-R | SAH4850D-R | SAH4860D-R | SAH4880D-R |
GENERAL NOTES
(1)All parameters at 25°C and per section unless otherwise specified.
(2)Heat sinking required, for derating curves see next page.
(3)Turn-on time for random turn-on (-R) version is 0.1 msec.
(4)It is DC control as a default in the recommendation table, but it can be changed to AC control according to demand.
Copyright © 2022 Jiangsu GOLD Electric Control Technology Co., Ltd. - www.goldssr.com All Rights Reserved.